AXIS Q1775-E Network Camera
LED Indicators
Note
The housing LED referred to in the table below is located in the housing.
Housing LED
(fan and heater)
Indication
Green
Normal operation.
Flashing green
Single flash: Heater error
Double flash: Fan error
Triple flash: General error
Alarm events will be triggered through the camera’s input port.
Contact your Axis reseller for information about spare parts and
troubleshooting.
Status LED Behavior and Buzzer Signal for Levelling Assistant
For information on using the control button to start levelling of the camera, see
Color
Buzzer
Camera position
Fixed green
Continuous beep
Level
Flashing green
Fast interval
Almost level
Flashing orange
Medium interval
Not level
Flashing red
Slow interval
Far from level
Connectors and Buttons
For specifications and operating conditions, see
.
Network Connector
NO
NO
NOTICE
TICE
TICE
Due to local regulations or the environmental and electrical conditions in which the product
is to be used, a shielded network cable (STP) may be appropriate or required. All cables
connecting the product to the network and that are routed outdoors or in demanding
electrical environments shall be intended for their specific use. Make sure that the network
devices are installed in accordance with the manufacturer’s instructions. For information
about regulatory requirements, see
Electromagnetic Compatibility (EMC) on page 2
.
13
E
N
G
L
IS
H
Summary of Contents for Q1775-E
