AXIS Q6035 PTZ Dome Network Camera
Video and Audio
•
G726
Sample rate -
The number of times per second the sound is sampled. A higher sample rate will provide better audio quality, but
also requires a greater bandwidth.
Bit rate -
Set the required bit rate depending on the selected encoding. A higher bit rate will give better audio quality. A lower bit
rate may have latency or delay, but will require less bandwidth.
For more information about these settings, please see the online help
.
Audio Output
An external speaker can be connected to the product’s Audio-out connector (a built-in ampli
fi
er is required for this). The output can
be connected to another ampli
fi
er with speakers. A stereo connector must be used for the audio out.
Con
fi
gure the audio output settings under
Video & Audio
>
Audio Settings
.
Note
A multi-connector cable (available from Axis;
Multi-Connector Cable (sold separately)
) is required when connecting external
audio equipment to the Axis product.
Output gain -
Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the
sound is too high, choose a lower dB.
Audio Clips
An audio clip is a sound
fi
le that can be played when events occur or directly from the
Live View
page. The audio clip must
fi
rst be
uploaded to the Axis product or recorded by a microphone connected to the product.
To add, download, modify or remove audio clips, go to
Video & Audio > Audio Clips
. For more information see the online help
.
To con
fi
gure the Axis product to play audio clips when an event occurs, an action rule must be set up. For more information, see
Events, on page 34
.
Note
Audio clips cannot be used if the product’s audio functionality is enabled. The audio functionality is enabled on the
Audio
tab under
Video & Audio > Video Stream
.
22
