background image

Section 4: NetWare (NCP)

52

AXIS StorPoint CD E100 User’s Manual

Installation as an

NDS Server

If used as an NDS server, the StorPoint CD must first be installed in the NDS 
tree. The most convenient way to do this is using the installation wizard 
available from the StorPoint CD Web interface, see “

Wizard

” on page 52.

However, if you do not have TCP/IP, you must use a text editor and edit the 
configuration file manually. Refer to “

Text Editor

” on page 53.

Important!

If you change any of the following parameters after installing the StorPoint 
CD in the NDS tree, you might need to repeat the installation:

• IP address
• Internal Net Address
• IPX Enable
• PureIP Enable

Requirements

When installing the first StorPoint CD into the NDS tree, it is recommended 
that you use an account with Supervisor rights to the [Root] of the tree. 

The StorPoint CD will extend the NDS schema with a new attribute called 

AXIS:SPcd:rights

 which will be added to the NCP Server. The extension is 

needed for storing configuration data. The StorPoint CD also becomes easier to 
administrate and more fault tolerant to changes in your NDS tree.

The new attribute will not affect the operation of your NetWare servers. The 
schema extension has been approved by Novell as part of the YES certification of 
this product.

Notes:

Adding the schema extension requires Supervisor rights to the [Root] object 
of the NDS tree. 

If you do not have Supervisor rights to [Root] or if schema extensions are 
not allowed in your NDS tree, you can store the access rights in a file on a 
NetWare file server. However, you must specify the NDS Rights Storage 
and NDS Rights File parameters properly. You will need Supervisor rights 
to the Organizational Unit (OU). After the NDS installation, you must 
create and assign access rights to the directory on the NetWare file server 
where the file is stored. 

For subsequent installations, Create rights to the context where you want to 
install the StorPoint CD will be sufficient. 

Wizard

The installation wizard is a convenient way to install your StorPoint CD in the 
NetWare environment.

1. Verify that the NDS tree is synchronized. To do that, you load 

DSREPAIR.NLM

 on a NetWare server console in the NDS tree and select 

Unattended full repair

.

Important!

If the NDS tree is not synchronized, do not continue the installation until 
you have solved the problem.

2. Start your Web browser, and enter the name or IP address of the StorPoint CD 

in the location/address field.

Summary of Contents for StorPoint CD E100




























































































































































Reviews: