StorPoint NAS
100 User’s Manual
Appendix A: Parameter List
77
ShowAllVolumes
= yes
Shows all drives and discs also at SYS level.
BinderyEnable
= yes
Enables bindery mode login. When using NDS, set to
no
in
order to increase system security. The Supervisor can
always login in bindery mode even if this parameter is set to
no
.
BindAuthentication
=
Name of the server used for authenitcating clients.
NDSEnable
= yes
Enables NDS mode.
NDSTreeName
=
Name of the tree where you wish to install the StorPoint
NAS.
NDSServerContext
=
Distinguished name of the context in the NDS tree where
you wish to install the StorPoint NAS, e.g.
Corp.Acme
.
NDSAdminName
=
Distinguished name of a user or administrator with
Supervisor or Create rights to the context where you want
to install the StorPoint NAS, e.g.
Admin.Acme
.
NDSAdminPassword
=
Password for the administrator defined in
NDSAdminName. Once written into the configuration file,
the password will not be shown but replaced with *’s,
representing each letter of the password.
NDSInstall
= no
Set to
install
when you are ready to install the StorPoint
NAS in NDS, or
forced
to overwrite the NDS server object.
NDSRightsStorage
= NDS
Set to
NDS
to store the access rights in the NDS tree. Set
to
File
to store the access rights in a file on the Novell
server. This is necessary if you do not allow schema
extensions in your NDS tree, or if you do not have
Supervisor access rights.
NDSRightsFile
=
If you have set NDSRightsStorage to
File
, specify the whole
path to the file on the Novell file server using this syntax:
SERVER/VOLUME:DIR/.../FILE.DAT
The specified directory
must exist and the StorPoint NAS must have Read, Write,
Create, Erase, Modify and File Scan rights. The StorPoint
NAS will create the file once you start adding trustees.
TimeSyncSources
= None
Default is
SAP
for the network agreed time. Alternatively,
enter the server names to be contacted for time
synchronization.
[SMTP]
Primary Mail Server
Secondary Mail Server
=
Administrator Address
=
Mail Log Events
= no
No
means that no log events will be sent via e-mail to the
administrator.
Error
means that only errors will be sent to
the administrator.
Warning
means that only warnings will be
sent to the administrator.
All
means that all logged events
will be sent via e-mail to the administrator
[END]
Parameter name
Value
Description
