background image

Specification of materials

 

Canopy

Upper surface: Porcher Sport: Skytex 9017 E25A, universal, 38 g/m2
Lower surface: Porcher Sport: Skytex 70000E3H, classic II, 27 g/m2
Ribs: Porcher Sport: Skytex 9017 E29A, hard finish, 40 g/m2
Porcher Sport: Skytex 70000E91, hard finish, 27 g/m2
Reinforcement:  Polyamide rods 
Thread: Bonded nylon D60, D40

Suspension system

Lines

LIROS: Dyneema DC 120/ comp line, 0.85mm, minimum strength 120 daN
LIROS: Dyneema DC 60/ comp line, 0,7 mm, minimum strength 60 daN
LIROS: Dyneema DC 200/ comp line, 1,6mm, minimum strength 200 daN
LIROS: Dyneema DFLS 200/ PES cover, 1.42mm, minimum strength 200 daN
Cousin Trestec: Vectraline 12100/ comp line, 0.6mm, minimum strength 50 daN
Cousin Trestec: Vectraline 16140/ comp line, 0.7mm, minimum strength 75 daN
Cousin Trestec: Vectraline 16330/ comp line, 1.0mm, minimum strength 145 daN
Cousin Trestec: Vectraline 12240/ comp line, 1,2mm, minimum strength 200 daN

Risers:

Cousin Trestec: technora/PES webbing ref3455, width 12mm, minimum strength
1100 daN

Maillons:

Elair Servis: Niro triangle 4/200, minimum strength 200 daN

Speed system pulleys:

Riley Fittings Australia: RM 302
Harken USA, Ball Bearing Pulley 467

All spare parts could be obtained from Axis Para at www.axispara.cz or our local
dealer in your country.

Summary of Contents for VENUS SC























Reviews: