V 2 0 0 2 1 3 E N
S e i t e
17 | 27
To ensure the best possible cooling, we recommend that the Energypack are inserted as follows:
Figure 2:
Ins ert 3 to 6 Energypack
3.
Screw the downholder to the right and left of the base of the system housing.
4.
Screw each Energypack with two screws (M6) to the downholder/grounding support.
For example, refer to Figure 3.
Figure 3:
Energypack fixed to the grounding support
with 3 Energypack
with
4 Energypack
with 5 Energypack
with
6 Energypack
