Optional Accessories
27
Co-Matic AF32 Junior Power Feed Code: 950506
A medium weight power feed unit with three PU rollers, all
spring-loaded to provide a constant feed rate for many
machining or cutting tasks. There is a choice of four feed speeds,
easily selectable by removing the side plate and re-positioning
the drive gears. Reverse feed is available via a selection switch.
The horizontal and vertical position of the drive head can be
precisely adjusted with the aid of the two adjusting screws
and then securely locked in place with the two handles. An
additional feature is the ability to rotate the head through 90°
so that pressure can be applied to the work in either the
vertical or horizontal planes. The unit is secured to the table
of the machine, by bolting through or by screwing into holes
tapped into the machine bed, see fig 67.
NOTE: The Co-Matic AF32 comes with a standard 13Amp
plug. You need to remove this plug and wire in the 16Amp
three pin plug that comes with the spindle moulder. This
should be done by a competent electrician.
• 240W motor fitted with reverse
• Feed speeds 5, 8, 9 & 11m/min
• Max height under rollers 150mm
• Max reach 260mm
• Column Diameter 40mm
Fig 67
Co-Matic Power Feed Assembly
Step 1
Step 3
Step 4
Step 2
Mounting holes
Connect the 16Amp three pin plug for the AF32 into the
16Amp socket to the side of the spindle moulder
