04
W H I T E
A X M I N S T E R
W
What’s in the Box...
www.axminster.co.uk
Model Number:
MS3816
1 No. 16mm Bench Morticer with Sliding Table
1 No. Operating Lever
1 No. Grip Sleeve for Operating Lever
2 No. Table Distance Stops rods with ring collars and star knobs
1 No. Lateral Table Control Lever with knob
1 No. 12mm Hollow Chisel Set
1 No. Guarantee Card
1 No. Instruction Manual
Having unpacked your machine and its accessories, please check the contents against the
equipment list ”What’s in the box”, if there are any discrepancies, please contact Axminster
Power Tool Centre using the procedures laid down in the catalogue.
Please dispose of the packaging responsibly; much of the material is bio-degradable. The
machine and its accessories will arrive coated with heavy corrosion preventative grease and
greased wax paper. These may need to be cleaned from the machine, its components and
accessories prior to it being set up and commissioned. Use coal oil, paraffin or a proprietary
degreaser to remove the barrier grease.
Be warned, it will stain if you splash it on clothing etc.; wear overalls, coverall et al., rubber
gloves are also a good idea, as is eye protection if your cleaning process tends to be a little
bit enthusiastic. After cleaning, lightly coat the exposed metal surfaces of the machine with
a thin layer of light machine oil. N.B If you use paraffin/kerosene make sure you apply this
thin film sooner rather than later.
