background image

 

IMPORTANT SAFETY RULES FOR DUST COLLECTORS   

     

WARNING:

 Basic precautions should always be 

followed when using your dust collector. To reduce the 

risk of injury, electrical shock or fire, comply with the 

safety rules listed below: 

1.  READ and understand the instruction manual 

before operating the dust collector.   

2.  DO NOT leave the dust collector plugged into the 

electrical outlet. Unplug dust collector from outlet 

when not in use and before servicing, changing 

bags, unclogging and cleaning. 

3.  ALWAYS turn the power switch “OFF” before 

unplugging the dust collector. 

4.  WARNING: TO REDUCE THE RISK OF 

ELECTRICAL SHOCK do not use outdoors or on 

wet surfaces. Use for dry pickup only! 

5.  FOLLOW all electrical and safety codes, including 

the National Electric Code (NEC) and the 

Occupational Safety and Health Regulations 

(OSHA). All electrical connections and wiring 

should be made by qualified personnel only. 

6.  DO NOT use the dust collector to pick up 

flammable or combustible liquids, such as gasoline. 

NEVER use the dust collector near any flammable 

or combustible liquids. 

7.  USE the dust collector to pick up wood materials 

only. DO NOT use the dust collector to pick up 

metal shavings, dust, water, or parts. 

8.  NEVER use the dust collector to dissipate fumes or 

smoke. NEVER pick-up anything that is burning or 

smoking, such as cigarettes, matches or hot ashes.   

9.  USE only as described in this manual. 

10.  DO NOT pull the dust collector by the power cord. 

NEVER allow the power cord to come in contact 

with sharp edges, hot surfaces, oil or grease. 

11.  DO NOT unplug the dust collector by pulling on 

the power cord. ALWAYS grasp the plug, not the 

cord. 

12.  DO NOT handle the plug or dust collector with wet 

hands. 

13.  REPLACE a damaged cord immediately. DO 

NOT use a damaged cord or plug. If the dust 

collector is not operating properly, or has been 

damaged, left outdoors or has been in contact 

with water, return it to an Authorized Service 

Center for service. 

14.  DO NOT use the dust collector as a toy. DO NOT 

use near or around children. 

15.  DO NOT insert fingers or foreign objects into the 

dust intake ports. Keep hair, loose clothing, 

fingers, and all body parts away from openings 

and moving parts of the dust collector. 

16.  DO NOT use the dust collector without a filter bag 

and dust collection bag in place and properly 

secured. 

17.  DO NOT operate the dust collector with unused 

dust intake ports uncapped. ALWAYS cover 

exposed dust intake ports.   

18.  PERIODICALLY INSPECT dust and filter bags for 

any cuts, rips or tears. NEVER operate the dust 

collector with a damaged bag or vacuum hose.   

19.  The dust collector is designed for home use or 

light commercial duty ONLY! 

20.  CONNECT dust collector to a properly grounded 

outlet only. See Grounding Instructions. 

 

SAVE THESE INSTRUCTIONS 

Summary of Contents for FT-1000













Reviews: