CHANGING THE BELT
13
7
Pull locking pin
Press down
Press down the lever and hold in place, pull the locking pin out
and raise the roller assembly to re-tension the belt.
8
Replace the belt and close the door.
6
2
1
CHANGING MOTOR BRUSHES/ MAINTENANCE
Check the condition of the motor brushes every 5-6 months.
Unscrewing each brush cap screw in turn.
Check the condition of the motor brushes and replace just
before the index line.
There is very little mechanical maintenance that can be carried
out on the machine, keep the machine clean.
1. Remove the belt plate and check there is no dust or resin
build up on the pulleys or at the edges of the platen.
2. Remove all dust deposits and clean the motor using an ‘M’
Class Vaccum Cleaner.
3. Remove the dust extraction hose and check any build up
of deposits inside the hose and extraction outlet.
Index mark
Replace mark
