Axminster Trade UB-802 User Manual Download

Page: 7 / 16

Specifications:

Motor----------------------------------------------------------------------------------------- 2HP/240V/50Hz/ 1 Phase

AMP------------------------------------------------------------------------------------------------------------------ 12 A

Motor Speed--------------------------------------------------------------------------------------------------- 2850 RPM

Suction Capacity---------------------------------------------------------------------------------------------- 1500 CFM

Static Pressure-------------------------------------------------------------------------------------------- 11 Inch H2O

Inlet Size------------------------------------------------------------------------------------------------------------------- 6”

Switch------------------------------------------------------------------------------------------------------ Magnetic Switch

N.W.------------------------------------------------------------------------------------------------------------------ 51.5 KGS

G.W.------------------------------------------------------------------------------------------------------------------- 55.8 KGS

CUFT--------------------------------------------------------------------------------------------------------------------- 11’

Summary of Contents for Trade UB-802











