10
•
Troubleshooting
Digidata 1322A Operator’s Manual, Copyright 2000-2001, Axon Instruments, Inc.
Step 3
Check that the Digidata 1322A and SCSI card are properly installed. In
Windows
95/98
, go to Start Button/Settings/Control Panel/System/Device Manager tab. The
figure shows an
example of the
Device Manager
window. First, click
on the plus (+) sign
next to
Axon
Instruments
. You
should see
Axon
Digidata 1322
.
Then, click on the
plus sign next to
SCSI controllers
.
You should see the
label for the SCSI
adapter card
shipped with the
Digidata 1322A.
Double-click on the
SCSI adapter entry
to see the device
status.
Windows NT 4.0
users can verify the
correct installation of the SCSI adapter in a similar manner by going to Start
Button/Settings/Control Panel/SCSI Adapters, and looking at the SCSI adapter list.
In
Windows 2000
, go to Start Button/Settings/Control Panel/Administrative
Tools/Computer Management/System Tools/Device Manager. The Device
Manager is the same as in Windows 95/98.