CHAPTER 2
CHAPTER 3
31
30
3.
Check that the device is connected correctly. You should see information on the
screen. If not, repeat step 2.
"Click"
1.
Remove the unit from its windscreen mounting, pressing on the plastic tab.
2.
Plug
the power cable into the unit. Push it in until you hear a click
.
This connection must be made fully for the device to operate correctly.
To navigate through the unit's menus:
Use the arrows to
navigate within the
menu
Double-click
on
to enter the
menu
STOP
Press
to leave a menu
For your safety, only interact with the unit when the vehicle is
stopped. Above a speed of 10 km/h, the buttons no longer operate.
STEP 4 - CONNECTING THE UNIT TO THE POWER SUPPLY
CONNECTING THE UNIT
ACTIVATING THE UNIT
