5
REV. 11/3/2020 INSTAXDSPL-HN1
BLUETOOTH STREAMING INTERFACE
16-pin Header
16-pin Header
AX-DSPL-BT
AX-DSPL-SP
AX-DSPL-BT
AX-DSPL-SP
• The
AXDSPL-BT
Bluetooth streaming interface can be used to stream media directly to
the interface.
• While streaming media the volume on the phone will be used. As an option, the
AXBK-1
(sold separately) can be used to control the volume.
Note:
The bass knob included with the
AXDSPL-HN1
can be used if it will not be used to
control a subwoofer.
1.
Important!
Unplug the interface from the vehicle.
2.
Remove (4) Phillips screws securing the interface, then remove the top cover, exposing
the circuit board within.
3.
Locate the 16-pin header on the circuit board.
4.
Important!
Referencing how the
AXDSPL-BT
is laid out in the picture, carefully line up
the header pins to the interface. Gently press down to secure.
Note:
Both interfaces may be damaged if installed wrong.
5.
Reinstall the top cover to complete the installation.
AXBK-1 Installation:
6.
Connect the
Brown
wire from the interface to the
Orange
wire from the
AXBK-1
.
Ground the
Black
wire from the
AXBK-1
.
Continued on the next page
