background image

Installation instructions for part AXGMLN-08

REV

. 5/6/2020   INST

AXGMLN-08

axxessinterfaces.com  

  metraonline.com

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION

 

Axxess Integrate

CAUTION!

 

All accessories, switches, climate controls panels, and 

especially air bag indicator lights must be connected before cycling 
the ignition. Also, do not remove the factory radio with the key in the 
on position, or while the vehicle is running.

•  Provides accessory power 

(12-volt 10-amp)

•  Retains R.A.P. (retained 

accessory power)

•  Provides NAV outputs (parking 

brake, reverse, and speed sense)

•  Retains chimes
•  Retains OnStar/OE Bluetooth
•  Adjustable OnStar level

•  Designed for non-amplified 

models, or when bypassing 

a factory amp

•  Retains balance and fade
•  AXUSB-CBL updatable 

(sold separately)

INTERFACE FEATURES

• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)

TOOLS REQUIRED

AXGMLN-08

GM Data Interface

2012-2016

APPLICATIONS

• AXGMLN-08 interface • AXGMLN-08 harness 
• 16-pin harness with stripped leads

INTERFACE COMPONENTS

Connections to be made

 ...................................................

2

Installing the AXGMLN-08

 ................................................

3

Initializing the AXGMLN-08

 ..............................................

3

Adjusting the AXGMLN-08

 ................................................

3

Table of Contents

CHEVROLET

Avalanche † * 

2012-2013

Express † 

2013-2015

Malibu (with single color, 

monochrome display) *  2013-2015

Malibu Limited (with single color, 

monochrome display) * 

2016

CHEVROLET (CONT)

Silverado 2500/3500 † * 

2014

Silverado † * 

2012-2013

Suburban † * 

2012-2014

Tahoe † * 

2012-2014

Trax * 

2015-2016

GMC

Savana † 

2013-2015

Sierra 2500/3500 † * 

2014

Sierra † * 

2012-2013

Yukon/Yukon XL † *  2012-2014

* These vehicles have an amplifier option. Please reference the “Service Parts Identification” sticker located in the 

glove box for the RPO code UQ7 or Y91. If UQ7 or Y91 are present, then the vehicle is equipped with an amplifier. 

Either use the AXGMLN-07 interface, or bypass the amplifier.

† Only for models with NAV.

Summary of Contents for AXGMLN-08









Reviews: