AXTC-FD2
I N S T A L L A T I O N I N S T R U C T I O N S
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
REV. 7/30/19 INSTAXTC-FD2
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections ............................................................2
Programming .........................................................3
Troubleshooting .....................................................4
Ford
SWC
(Steering Wheel Control)
and Data Interface 2012-2016
APPLICATIONS
• Provides accessory power
(10-amp)
• Provides wires for multimedia
radios (park brake, reverse,
speed sense)
• Retains audio controls on the
steering wheel
• Designed to be compatible
with all major radio brands
• Auto detects vehicle type, radio
connection, and preset controls
• Ability to dual assign steering
wheel control buttons
• Retains memory settings even
after battery disconnection
or interface removal (non
volatile memory)
• Provides illumination output
• Retains the 3.5mm AUX-IN jack
• Micro-B USB updatable
• Includes 5v factory amplifier
step-down
Ford (1)
Escape
2013-2016
Focus
2012-2014
Transit Connect
2014-2016
(1)
This interface must be used along with the corresponding Metra radio-install-kit (sold separately)
• AXTC-FD2 interface • AXTC-FD2 harness
• 3.5mm adapter
• LD-AFDI-5V amplifier step-down
