Axxess BX-GM6, Installation Instructions Manual

BX-GM6

2

Applications

CHEVROLET

Cobalt 2007-2010
HHR 2006-2011
Malibu 2008-2012

PONTIAC

G6 2010
G6 2009 (5th digit of VIN 
must be a J, K, or L)
G5 2007-2009
Solstice 2006-2009

SATURN

Aura 2007-2009
Sky 2007-2009

From the 16-pin harness with stripped leads to the aftermarket radio:

•  Connect the (2) 

Red

 wires to the accessory wire.

Note:

If installing the AX-LCD (sold separately), there will be an 

accessory wire there to connect as well.

•  Connect the 

Blue/White

 wire to the amp turn on wire. 

Note:

  This wire must be connected whether or not there is a 

factory amp in the vehicle or not. Failure to do so will result in 

the interface not being able to be programmed.

•  Connect the 

Orange/White

 wire to the illumination wire. (If the aftermarket 

radio has no illumination wire, tape off and disregard this wire).

•  Connect the 

Brown

 wire to the mute wire. (If the aftermarket radio 

has no mute wire, tape off and disregard this wire).

•  Connect the 

White

 wire to the left front positive speaker output.

•  Connect the 

White/Black

 wire to the left front negative speaker output.

•  Connect the 

Gray 

wire to the right front positive speaker output.

•  Connect the 

Gray/Black

 wire to the right front negative speaker output.

•  Tape off and disregard the 

Green

, 

Green/Black

, 

Purple

, 

Purple/Black

 wires, they will not be used in this application.

Continued on the next page

Connections to be made