XSVI-9006-NAV
I N S TA L L AT I O N I N S T R U C T I O N S
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
REV. 3/11/19 INSTXSVI-9006-NAV
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Small flat-blade screwdriver
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
Volkswagen
Data Interface
2015-up
APPLICATIONS
• Provides accessory power
(12-volt 10-amp)
• Retains R.A.P. (retained
accessory power)
• Provides NAV outputs (parking
brake, reverse, speed sense)
• For use in non-amplified
systems, or when replacing an
amplified system
• 48-inch leads for remote tuner
location
• Pre-wired ASWC-1 harness
(ASWC-1 sold separately)
• Retains the factory backup
camera
• Retains balance and fade
• Micro-B USB updatable
Volkswagen
Beetle
2016-2019
Golf Series
2015-up
Jetta
2016-2018
Jetta GLI
2016-2018
Passat
2016-up
Tiguan
2016-2017
• XSVI-9006-NAV interface
• XSVI-9006-NAV harness
for more detailed information about the product and up-to-date
vehicle specific applications
