49
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking
zone.
No heating takes place unless there is a suitable pan on the
cooking zone.
The display “ ” will automatically disappear after 1 minute if
no suitable pan is placed on it.
If the display flashes alternately with the heat
setting
Finish cooking
Turn the cooking zone off by scrolling down
to “0” or touching “ ” and “ ” control
together. Make sure the display shows “0”.
Turn the whole cooktop off by touching the
ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to
touch. It will disappear when the surface has
cooled down to a safe temperature. It can
also be used as an energy saving function
if you want to heat further pans, use the
hotplate that is still hot.
Summary of Contents for ATI3/3
