Ayce 5260.1, Operator'S Manual

GB

GB

| 

96     97 

180716_ayce_5260.1_IM

180716_ayce_5260.1_IM

instructions, taking into account the working conditions and the work to be 

performed. Use of the power tool for operations different from intended 

could result in a hazardous situation.

5.  Battery tool use and care

a)

  Ensure the switch is in the off position before inserting battery pack. 

Inserting the battery pack into power tools that have the switch on invites 

accidents. 

b)

  Recharge only with the charger specified by the manufacturer. 

A charger 

that is suitable for one type of battery pack may create a risk of fire when used 

with another battery pack.

c)

  Use power tools only with specifically designated battery packs. 

Use of any 

other battery packs may create a risk of injury and fire.

d)

  When battery pack is not in use

, 

keep it away from other metal objects like 

paper clips, coins, keys, nails, screws, or other small metal objects that 

can make a connection from one terminal to another.

 Shorting the battery 

terminals together may cause burns or a fire.

e)

  Under abusive conditions, liquid may be ejected from the battery; avoid 

contact. 

If contact accidentally occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help. Liquid ejected from the battery may cause 

irritation or burns.

6. Service

a)

  Have your power tool serviced by qualified repair person using only 

identical replacement parts. 

This will ensure that the safety of the power tool 

is maintained.

NOISE/VIBRATION INFORMATION

Measured sound values determined according to EN 60745-1.

WEAR HEARING PROTECTION! 

Vibration total values (triax vector sum) determined according to EN 60745-1: The 

vibration emission level given in this information sheet has been measured in 

accordance with a standardized test given in EN 60745-1 and may be used to compare 

one tool with another. It may be used for a preliminary assessment of exposure. 

The declared vibration emission level represents the main applications of the tool. 

However if the tool is used for different applications, with different accessories or 

poorly maintained, the vibration emission may differ. This may significantly increase 

the exposure level over the total working period. An estimation of the level of exposure 

to vibration should also take into account the times when the tool is switched off or 

when it is running but not actually doing the job. This may significantly reduce the 

exposure level over the total working period. Identify additional safety measures to 

protect the operator from the effects of vibration such as: maintain the tool and the 

accessories, keep the hands warm, organization of work patterns.

DESCRIPTION OF THE SYMBOLS

1.  Safety symbols

The use of symbols in this manual is intended to draw your attention to possible risks. 

The safety symbols and the explanations that accompany them must be perfectly 

understood. The warnings in themselves do not remove the risks and cannot replace 

correct actions for preventing accidents.

WARNING

!

This symbol, marking a point of safety, indicates a caution, 

warning or danger. Ignoring this warning can result in an 

accident to yourself or others. To limit the risks of injury, 

fire or electrocution, always follow the recommendations 

indicated.

Before any use, refer to the corresponding section in this user 

manual.

These symbols indicates the requirement of wearing ear 

protection, eye protection, respirator and gloves when using 

the product.

Conform to CE safety standards.

Class II symbol: this machine is designed with double 

insulation. It is not necessary to connect it to an earthed 

power socket.

1,5 Ah