34
|
35
TECHNICAL SPECIFICATIONS
●
●
●
●
●
●
●
●
●
●
●
The heater is for outdoor use only.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
Don’t touch the hot surfaces.
Do not use pesticide or other flammable spray around the product
because it will damage the device and cause fire.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening, as this may cause an electric shock, fire or
damage to the appliance.
Always ensure that hands are dry before operating or adjusting any
switch on the product or touching the plug and socket-outlet.
Do not leave this appliance unattended when it’s in use.
The most common cause of overheating is deposits of dust or fluff
in the appliance. Ensure these deposits are removed regularly by
disconnect the appliance and vacuum cleaning air vents and grilles.
Do not place the heater on carpet, don’t place the cable under
carpets. Arrange cord away from traffic areas so that it will not be
tripped over.
This unit has to be earthed while in use in order to protect the
operator against electrical shocks.
Avoid body contact with earthed or grounded surfaces. There is an
increased risk of electric shock if your body is earthed or grounded.
Model
Power
Rated Voltage
Protective Class
Protection Class
HA-35
700W
220-240V~50-60Hz
Class I
IPX4
GB
PRODUCT DESCRIPTION
Control knob switch
Angle knob
Handle
1
2
5
3
4
Cover
Base
INSTALLATION METHOD
1. Take the appliance out of the package.
2. Check that the appliance shows no signs of damage before using.
OPERATION
Note!
Since the appliance and its heating elements are slightly greased when delivered,
there might be a slight development of smoke and odor the first time it is used. This is
harmless and stops after a short a while. Be sure to provide for sufficient ventilation
during such time.
Warning!
Ensure that there is sufficient distance from the wall, fixtures or other appli-
ances. The distance must be at least 1 m to exclude the risk of fire.
5
1
3
2
4
