36
|
37
GB
●
●
●
●
●
●
●
CONTROL PANEL
Put the plug into the power socket.
The heater has two power ranges: 350W and 700W.
Turn control knob to left without oscillation function: LOW(350W) or HIGH(700W).
Turn control knob to right with oscillation function : (osci350W) or
(osci700W).
Fig 2 is the angle knob with two angle modes: 120° and 360°. When using the oscillation
function, turn angle knob to left 120° and turn right 360°.
Switch the heater off by turning control knob to OFF-position.
Remove the plug from the power socket.
CONTROL PANEL BUTTONS INTRODUCTION
●
●
●
Always disconnect the appliance and let it cool down completely before carrying out any
maintenance.
Use a vacuum cleaner to remove dust on inlet and outlet surfaces.
Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never
immerse the unit in water, nor let water drip into the unit.
CLEANING AND MAINTENANCE
●
●
●
Always disconnect the appliance, let it completely cool and clean it before storing.
If you do not use the device for a long period, put back the unit and the instruction manual
back into the original carton and store in a dry and ventilated place.
Do not place any heavy items on top of carton during storage as this may damage the
appliance.
STORING
Fig.1
Fig.2
Low
High
350W
700W
OSC+350W
OSC+700W
LOW
HIGH
Low
High
