150-7000-001
9
DC Power Connector
• The IP68 sealed DC Power Cable, 3 m (10 ft), is in the accessory box
• Line up the red dots to #5 in Figure 7
• Plug in the quick-connect three-pin connector
• To disconnect, pull the outside ring on the connector away from the unit until the
cable is free
• There are two flying leads: negative: black (-) and positive: yellow, labeled with
(+), and
• Connect the flying leads to the corresponding polarity on the DC voltage source,
primary terminal.
Optional AC Power Connector
• The optional AC Power Adapter Cable Set consists of a 3 m (10 ft) cable, the
power adapter and a 1.8 m (6 ft) cable
• The cable accepts voltage from 110 to 250 VAC and frequency from 7 to 63Hz
• The AC power plug is standard for 120 VAC/60Hz, common in North America, and
• Line up the red dots to #5 in Figure 7
• To disconnect, pull the outside ring on the connector away from the unit until free.
Optional USB Pass-through Connector
• The optional USB Pass-through Connector is an IP68 sealed four-pin connector
• The custom USB Cable is with shipping box accessories; it is .6 m (2 ft)
• Line up the red dots to #3 in Figure 7, and
• Plug together.
• To disconnect, pull the outside ring on the connector away from the unit until free.
Optional Touch Screen Connector
• The optional Touch Screen Connector is an IP68 sealed four-pin connector
• The connector is between the S-Video and Power Connector
• Line up the red dots to # in Figure 7, and
• Plug together.
caution!
Confirm the DC
connections are made
to the correct polarity.
9
