2
150-7000-001
Electrical
SAFETY
Connecting Cables
• Disconnect the power to the computer when the Monitor is being installed, and
• Upon installation, verify the power connector is securely seated on the unit.
Ratings and Grounding
This unit may be operated from an 8-30 VDC power source (external AC optional).
• Use the supplied power cable, and
• Always connect to a properly grounded power source.
Protection on Servicing
Servicing - User
• User care is limited to cleaning the unit
• Do not disassemble or modify the unit to avoid the possibility of an electrical shock,
damage to electrical components or scratching the Display surface, and
• Disassembly voids the warranty.
Servicing
Aydin Displays Qualified Service Personnel may be required if the unit:
• Does not operate normally when installation instructions are followed
• Does not operate normally when operating instructions are followed
• Has been dropped or damaged, or
• Exhibits a distinct change in performance, indicating a need for service.
Shipping
If the unit should need to be shipped to the Aydin Displays Service Center, the original
packing material should be used to insure safety in shipping. Repack the unit as it
would have originally been received from Aydin Displays.
Fluids from LCD Display
• If the Monitor should ever become shattered, do not touch fluids from an LCD Display
• If fluid should get on hands or clothing, immediately wipe off with liquid soap or rubbing
alcohol; wash with water; consult with a doctor, and
• If fluid gets in the eyes, flush eyes immediately with water for a minimum of 15 minutes;
consult with a doctor.
This equipment generates, uses and can radiate radio frequency energy. If not
installed with the unit’s accompanying cables, it may cause harmful interference
to radio communications.
Radio Frequency Interterence
caution!
caution!
2
