Diagram G-1:
Sleep Mode
setting
When the logger stop logging, all LCD included models could be used
to monitor the current temp. or RH condition. If you need this function,
You may select
NON-SLEEP
and press
OK
, then the logger will always
display current Temperature / Relative Humidity after completing
recording. Please be noted that this setting will consume the battery
power. (The software default in
Sleep
mode)
SLEEP MODE SETTING
20
Sleep Mode Setting
Ok
Sleep
Non-Sleep
Print out the data table to either a printer or a fax /internet application
depending on your available facilities. The print out points range is
selectable. (See Diagram H )
Depress icon to view detailed data table,which includes 1000 sample
readings. Temperature data shows the curser 1, If you are logging
model 8829 (Temp. & Relative Humidity), RH% reading shows
next to the temperature reading.
If logging model 8835, RH% and external temp. reading show next to
the temperature reading.
DATA TABLE
If you want to save battery and no need to monitor the environment
condition after stop logging, press the slide switch to the right for
SLEEP
then click
OK
.
In model 8814/8815/8834/8835, you could press start/stop key shortly
to turn on/off the LCD any time.
