37
Diagram T-2
Diagram T-1
CHANGE THE Y SCALE
.
When there are more than one curve display on the monitor, user
could press right key of mouse anywhere on the monitor to active
Y scale selection function. ( See Diagram T-1). There are "Temp "
"Temp2" and "all" three functions for selection.
Temp=air temp, Temp2=external temp, All= Temp.&Temp2.
Above is the display of "All", Y scale will be decided by two temp.
For example, if the highest/lowest temp. Of temp&temp2 are
30.1 and 10.5, then the Y scale will be 31 to 10.
While select temp2, if the highest/lowest value of temp2 is 20.1
and 10.5, then the Y scale will be 21 to 10.