99
Transmission channel
When this is selected, the screen shown below will be displayed.
When “At alarm generation” is specified in selecting the e-mail transfer conditions, the data of the channel
registered in this screen is written to the mail main text and the mail is sent. When nothing is registered, the data
of the channel on which an alarm was generated is written and sent.
When “Specified time” is specified in selecting the e-mail transfer conditions, the data of the channel registered in
this screen is written to the mail main text and the mail is sent.
■
Condition number
• Select the e-mailing condition number for the settings.
■
Channel data to be included in fixed interval mail
• Check which channels’ data will be sent.
■
E-mail messages
• The ARF2
00 can send e-mail messages like those below when there is an alarm, or on a regular schedule.
If the instrument name is specified (under System settings
→
Other settings), the instrument
name will appear in the subject line of the e-mail:
“
Message from (instrument name).
”
