109
12.1.2. Recorder display
The same contents seen on the recorder can be displayed. The buttons at the bottom of the screen act
like the keys on the recorder. Because an image file is used, loading this page takes more time than
loading other pages.
To prevent an operational error, do not operate the recorder and this screen at the same time. Also,
do not use the Refresh, Back, Forward, etc. buttons on the browser, but rather use the buttons at the
bottom of this screen.
When the Refresh button at the lower right of this screen is clicked, the current display is reloaded.
Click “Auto refresh ON” to have the screen updated at about 10-second intervals. To stop auto
refreshing, click “Auto refresh OFF.”
12.1.3. Data display
The data for the 128 recording channels can be displayed with tags and engineering units. Two kinds
of screens are selectable, a fixed display for which data is obtained at the time of initial display, and
a screen with data automatically updated every 10 seconds. At first, after the link on the top page is
clicked, the fixed display is shown. To change to the automatically updated screen, click “Start auto
refresh” at the bottom of the screen. To change to the fixed display from the automatically updated
display, click the “Stop auto refresh” link at the bottom of the screen.