113
12.1.7. Group settings
Parameters related to recording can be changed. Click the Set button after entering each item, and
the settings will be written to the recorder. The settings of one group are displayed on one screen.
Click the desired group number at the top of the screen to change groups. Groups from Group 1 to the
recorder’s group count setting (in System settings
→
Other) can be selected here. If the Record ON
checkbox is checked for a particular group, its settings cannot be changed until recording is stopped.
Available settings
Item
Description
Group name
Can be up to 16 characters long.
Recording period
The recording cycle (time interval used for data display and
recording).
Recording ON/OFF
Whether recording for the selected group is ON or OFF.
File format
The file format for data saved to the CF card is selectable. (See
11.5.)
Input channel
The measurement input terminal number (INPUT CH) to be used
for each recording channel (virtual channel) is selectable.
Trend display
Checkbox status determines whether or not each recording
channel’s trend is displayed.