18
Chapter 4. SETUP
The ARF200 is shipped with default factory settings. For actual operation, however, be sure to do
the following setup procedures.
Note)
On portions of the LCD screen, some pixels may be always lit or always not lit, and there may be
unevenness in brightness due to the characteristics of the liquid crystals, but these are not malfunctions.
Operation
Power ON
Stop and Power OFF
Saving to a memory
card
Start
Start/stop recording
11.5, File settings screen
Preparations for operation
Mount the ARF200 in a panel and wire it properly.
Screen switching
Chapter
6,
Setting
The ARF200 is shipped with default settings, but be sure to change the following settings as
appropriate for the actual application environment and measurement objective.
1. Initial settings (Chapter 8, INITIAL SETTINGS)
2. Settings for input processing, display, and recording, which can be changed either all at once or
separately.
All settings at once: HOME SCREEN (10.1, Quick Recorder Setup)
Individual settings: MENU SCREEN (11.2, Input Settings; 11.3, Display Settings; 11.5, File
Settings Screen)
