85
11.6. Totalizer settings
Totalizer function (integration) is determined by the calculation settings for each channel. This
screen is for selecting the procedure for resetting the cumulative count to 0.
Totalizer
F-value
calculation
Pulse input
ITG
ITG24
FV
Pulse (+) Pulse (-)
Manual reset
●
●
●
●
●
Base time
●
●
●
●
●
Auto reset
Interval
●
—
●
●
●
Digital input reset
●
—
●
●
●
• Start from the MENU screen.
• Press the
▼
button for the item to be set and then move to the input screen.
■
Setting instructions
• The method of resetting the total count for each channel can be specified here. If “All channels” is
selected, the settings here apply to all channels. Selecting “Individual” allows each channel to
have individual settings.
■
CH*
• If “Individual” is selected, the settings on this screen apply to the channel specified here.
*: The CH setting is available in version 2.00 and later.
■
Manual reset
• Resets the cumulative count to 0 manually.
■
Auto reset
• If automatic reset of integration is needed, set this to ON. Otherwise, leave it OFF.
■
Base time and interval
• The timing of totalizer reset is determined by: base time + (interval
×
n), where n = 0, 1, 2, 3 … .
Example: If the base time is set at 0:00 hours and the interval setting is 04:00, the cumulative
count is reset at 0:00, 04:00, 08:00, 12:00, 16:00, and 20:00 o’clock.