AB-6529
7
Parts Identification
Figure 4. Parts identification
Table 1. Indication and operation of operating status LED
LED indication
LED operation
Data transmitting
NC-bus TX LED: flashing
Data receiving
NC-bus RX LED: flashing
Major failure / initializing
ERR1: ON
Minor failure / initializing
ERR2: ON
Connection of Data Setter (H-MMI) / PC-MMI
1) Connection of Data Setter Model QY5111B
No conversion cable is required. Directly insert the male connector of the Data Setter into the female connector provided on
the Infilex GD basic unit.
At this time, hold the male connector with the
◄
mark facing left and insert it as the mark points to the
►
mark on the Infilex
GD basic unit.
2) Connection of Data Setter Model QY7211B / PC-MMI
Convert the D-SUB connector to the mini DIN connector with the conversion cable (Part No. 83104995-001).
At this time, hold the male connector with the
◄
mark facing left and insert it as the mark points to the
►
mark on the
Infilex GD basic unit.
Figure 5. Connecting Data Setter/PC-MMI
DIN rail
mounting
hook
Do not press the S1 switch.
S1 switch*
Connector (female)
for Data Setter
Power switch
LED for
Power ON/OFF
Battery holder
LED for
operating status
Insert the male connector as
the two arrows point to each
other.
