B. HDD Installation
1). Lift up the mounting brackets as illustrated. 2). Insert the HDD.
3). Push the HDD all the way back until the 4). Push back the mounting brackets to
connectors snaps-in completely.
secure the HDD.
5). Push the installed HDD back into the casing
to finish.
5. Physical Installation
A. Take out the HDD Tray
1). Push the release switch on the rear panel 2). Carefully slide out the HDD tray.
to eject the tray.
Push the HDD-installed tray back into the
casing until the tray and casing are fitted
securely.You will notice the release button
is back in its original position. Installation
is complete. Hard drive may need to be
partioned and formatted before it can be
properly recognized in the system*
2
