10015UK 01 -2004
Technical information:
ES-525 Validator
2
Average
Maximum
Minimum
Voltage From 12 Vdc to 24
Vdc
27 Vdc
10 Vdc
Current draw
Draw at rest
45 mA
50 mA
Draw while measuring coin
61 mA
65 mA
Draw while accepting coin
250 mA
500 mA
- Polarity inversion protection (pins 11 and 12 on connector JP5).
- Vcoma, (pin 3 JP5):
z
Positive: Between 5 Vdc and +27 Vdc.
z
Negative: Between 0 Vdc and –27 Vdc.
- Output lines, (pins 1, 2, 4, 6, 7 and 9 on connector JP5).
z
Rest:
open collector.
z
Active:
Common positive: Vcoma (pin3 on connector JP5) -1.2 v.
Common negative: Vcoma (pin3 on connector JP5) + 1.2 v.
z
Imax:
50 mA.
- Input lines, (pins 8, 10, 13, 14, 15, 16 and 17 on connector JP5).
z
High: open circuit or more than 3.6 Vdc, maximum 5.5 Vdc.
z
Low: maximum 1.2 Vdc.
- Imax driver classifier: 1.3 Amps.
Ô
Accepts a maximum of 25 different coins.
Of the 25 coins, 23 are programmable using the tele
programmer TL21 and 2 can be programmed by the
user.
Ô
Depending on the physical characteristics of the coins to be used with the
validator,
two types of
validator
are manufactured:
- The
“wide channel”
that is specially designed for thick coins. The maximum and
minimum measurements of the coins are:
Summary of Contents for ES-525
Page 20: ...10015UK 01 2004 Technical information ES 525 Validator 19 CE...
Page 33: ...10015UK 01 2004 Technical information ES 525 Validator 32 CPU Sel ES525 UK...
Page 34: ...10015UK 01 2004 Technical information ES 525 Validator 33...
Page 40: ...10015UK 01 2004 Technical information ES 525 Validator 39...
