14
ARZUM
15
ARZUM
Note: Your processor will not work until the lid, blender, or security lid
is fully seated and locked to provide your safety. The device will only
operate by inserting the blender container or the food container into
the motor slot and the lid towards the chamber.
USE OF THE FOOD PROCESSOR
• Before you start using your
device, please read the " Cleaning
and Care" section and carefully
wash the parts that can be washed
with warm soapy water. Never
immerse the main body in water,
wipe it off with a slightly damp
cloth.
• Fill the blender with 0.5 liters
of warm water to and run for 5
seconds at maximum speed to clean the blender jug.
OPERATıON
• Place the process container on the motor unit and turn it clockwise to
secure it .
• To run the blender; place the blender container over the motor body.
Turn clockwise to lock. There are four different positions to secure the
blender to the motor body. Do not apply too much force to the blender
jar handle .
sPEED BUTTON:
To start your device, you only
need to bring the on / off switch to position 1.
You can adjust the speed of your device by
turning the knob clockwise. With this function,
you can increase or decrease the speed of the
appliance according to the food grade you place.
PUlsE:
When you set the speed setting knob
to Pulse "P" position, your device will operate at instant, pulse and max
speed. When the pulse button is operated intermittently, the food to be
processed will be better chopped.
WARNıNG: Your processor will not work unless you place the process
container and cover exactly in place and lock it. Carefully read and
follow the written operating instructions.
WARNıNG: Before you remove your accessories, always turn the
power switch of your device to "0" (OFF) and unplug before moving
the accessory to and from the moving parts during use and before
cleaning your device .
• Avoid actions that may harm or damage the cord or plug of your
appliance. Do not carry your appliance by holding from the cord. To
unplug the tea maker, hold the plug and
NEvER
pull by the cord.
• Do not operate your device with damaged cables, plugs and
accessories, after any failure or when there is a malfunction. In this case,
please contact your nearest Arzum Authorized Service Center . The plug
and cable must be replaced by an authorized service agent.
• Never use a part not manufactured or recommended by the
manufacturer as they may cause fire, electrical shock or injury.
• Operate your device on a level surface.
• Before operating your device, make sure that the accessories are firmly
in place and do not operate any accessories without any ingredients.
• Do not fill your device's processing container and blender jug over the
specified amounts.
• Before starting, make sure that the container cover is fully seated and
locked.
• Do not disengage the locking mechanism using other tools.
• Pay attention to chopping, mixing, grating and slicing blades when
using or cleaning your robot. Blades can cause serious injuries as they
are very sharp. When using the blades, be careful to store the blades
in the correct places when cleaning to store them in the case or in the
protective case when not in use.
• While operating the blender and grinder sections of your device ; keep
your hands, your clothes, your hair, spatulas and other accessories
away from moving parts to reduce the risk of injury and damage to your
processor. Never open the large cover while using the blender.
• When using graters, push the material to be shaved using the presser,
NEvER
do this with your hand or other tool.
• Make sure that the motor stops well before removing any accessories
from your device.
• To reduce the risk of injury, do not try to insert the blade or carrier disc
without fitting it well.
• Use your device as recommended and fit for the purpose.
EN
