www.aztectent.com
Step 17:
The 40’ wide tent has a secondary set of hip brace pipes measuring
10’6”. Connect and pin these to the 40x hip intermediate fi tting, then
connect and pin the side tee at the eave of the tent.
Step 18:
Connect and pin the perimeter/eave pipes to the perimeter fi ttings.
Make all connections with the fi nal connection to the corner fi ttings of
the frame.
Step 19:
Lay down a drop cloth to unfold the end section of the tent top on one
end of the tent. Make sure to inspect the tent top for cleanliness at this
time as it becomes next to impossible to clean the exterior of the tent
once the top is installed. Unfold the tent top and pull it over the frame
shiny side up. **Dragging the top fabric on the ground, or pulling hard
over frame parts can damage, tear, and scratch the fabric. Be careful
with your fabric.
Step 20:
Unfold the middle section of the tent top and pull up and over the
framework.
GROUND CL
OTH
GROUND CL
OTH
Summary of Contents for QWIK-TOP FRAME
