Operating Modes:
You can use the AZTEC LED PAR-48 RGBW in four ways:
•
Sound-Active mode -The unit will react to sound, chasing through the
built in programs.
•
Auto Mode -The unit will automatically chase through the different
colors.
•
RGB Mode -Choose a single color or colors to stay static.
•
DMX control mode -This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as as the
Martin Light Jockey / AZTEC CX-12ii™.
Sound Active Mode:
In this mode the AZTEC LED PAR-48 RGBW will react to sound, and chase
through the different Dimming.
1. Plug the fixture in and Change Mode to “BEBE”
2. The fixture will now change via sound.
Auto Mode:
RGBW Mode:
1. Plug the fixture in and put Display Mode into R/G/B/A from 01-512 to adjust
from Darkest to Brightest.
DMX Mode:
Operating through a DMX controller give the user the freedom to create their
own programs tailored to their own individual needs. This function also
allows you to use your fixtures as spot lights. To help set up DMX Control
refer to the set-up specifications that come with your DMX controller as well.
1. This function will allow you to control each individual fixture’s traits with a
standard DMX 512 controller such as: AZTEC CX-12ii Lighting Controller
2. The LED PAR-48 RGBW uses eight DMX channels to operate. To Set
DMX Channel put Display Mode into D001-512
3. To run your fixture in DMX mode, plug in the fixture via the XLR
2. Adjust the speed by Button Up and Down to adjust programs.
1. Plug the fixture in and put Display Mode into CC/CP/DE.
connections to any standard DMX controller. Set your desired DMX
address
Summary of Contents for LED PAR-48 RGBW
Page 1: ...USER INSTRUCTION MANUAL ...
