Important tips before Operation
Due to transportation requirements, all the motors inside each unit
are secured with 2 fixing screw bolts. Please observe the diagram
below for removing these screws before placing the capsule mixer
on the cabinet.
1. Please unscrew the two screw bolts,
which are pre-installed at the bottom
of each unit, as shown in the
Diagram 1.
Please maintain the balance of the
apparatus while removing the screw
bolts. Please remove the two bolts
simultaneously as unscrewing
1 bolt at a time could result in
difficulties loosening the second bolt.
2. Please retain the two bolts to the
screw holes as shown in Diagram 2,
for future needs. When the
apparatus is required to be
transported from one place to
another, please screw back these
two screw bolts before removal or
delivery to prevent possible damage.
3
.
Insert the “L” shape plug into
the
amalgamator power socket,
then connect the power plug with the
adaptor. Please make sure the
power plug is connected securely
(As shown in Diagram 3)
7
1
2
3
ENGLISH
