External Spray E-type Airmotor
Ultimate BA-603 4-hole
BA-603
Operation Manual
ENGLISH
The EU directive 93/42/EEC was applied in the design
and production of this medical device.
Rev.2016/08
AUTOCLAVABLE
9792869
Caution before use
Back-end configuration
Drive Air Pressure
Rotation Speed
Air Consumption
Breakdown Torque
Weight
Applicable to 4-hole ISO standard connector
29-42 psi (0.2-0.29 MPa)
17,100-20,900 rpm (36 psi (0.25 MPa))
less than 66 NL/min (36 psi (0.25 MPa))
more than 1.5 N・cm (36 psi (0.25 MPa))
93 grams
• The BA Brand Ultimate external spray airmotor is intended for use by
dental professionals only.
• Read this Operation Manual carefully before using the airmotor. Be
sure to follow all the operating instructions, including all cautions and
warnings.
• Keep this Operation Manual for future reference.
Note: T he maximum speed may vary slightly depending on the type of
tubing connected to the airmotor.
Installation
Dimensions and part descriptions:
The device is intended for use in general dental applications: Drive for
Straight or Contra angle handpieces for dental restoration and prophy-
laxis.
• Make sure that tubing connector is ISO standard 4-hole.
• Align the pipes at the back-end of the airmotor with the corresponding
holes of the tubing, and then tighten the nut situated on the tubing by
turning it clockwise.
0476
0476
Specifications
lndications for use
Installation of Airmotor onto Tubing
Connector
