External Spray E-type
Contra Angle Handpiece
Operation Manual
The EU directive 93/42/EEC was applied in the design
and production of this medical device.
Ultimate BA101
Ultimate BA105
Ultimate BA105T
9792837
9792838
9792922
Rev.2016/08
AUTOCLAVABLE
Caution before use
BA101
BA105 and BA105T
BA101
BA105
BA105T
• The BA Brand Ultimate external spray contra angle handpiece is in-
tended for use by dental professionals only.
• Read this Operation Manual carefully before using the contra angle
handpiece. Be sure to follow all the operating instructions, including
all cautions and warnings.
• Keep this Operation Manual for future reference.
• Swing latch plate out. Remove the existing bur blank.
• Insert a bur into chuck hole all the way until the end of bur shank
touches the back of the chuck.
• Swing the latch plate back until it is fixed with a snap at the centre
position of the collar of the contra angle head.
• Push the pushbutton with thumb to open chuck, and then remove
the existing bur blank.
• Push the pushbutton with thumb, and then insert a bur into the
chuck hole.
• Release the pushbutton with thumb when the end of the bur shank
touches the end of chuck.
Note : The maximum speed may depend directly on the type of
tubing and type of motor.
Applicable Bur
Insertion/Removal
of Bur
Allowable Maximum
Speed
Nose Configuration
Sterilization
2.35 mm CA bur
Standard Latch Type
30,000 rpm
Autoclavable
Pushbutton Type
40,000 rpm
Autoclavable
Pushbutton Type
40,000 rpm
Autoclavable
Thermo-Disinfectable
2.35 mm CA bur
2.35 mm CA bur
Thermo-Disinfectable
0476
ENGLISH
0476
Specifications
Removal/Insertion of Bur from/into Contra
Angle Handpiece
