background image

 

 

- 3 -

SAFETY 

 

1)

 

KEEP CHILDREN AND PETS AWAY FROM UNIT WHILE IN 
OPERATION AND/OR PLUGGED IN. 

2)

 

DO NOT PUT FINGERS OR OTHER OBJECTS IN UNIT WHILE IN 
OPERATION AND/OR PLUGGED IN. 

3)

 

TO AVOID ELECTRIC SHOCK DO NOT OPERATE IN POOLED WATER, 
MOTOR MUST BE KEPT DRY AT ALL TIMES. IF UNIT BECOMES WET, 
THOROUGHLY DRY BEFORE NEXT OPERATION. 

4)

 

INDOOR USE:  USE ONLY WITH A GROUNDED PLUG AND/OR 
EXTENSION CORD TO AVOID RISK OF ELECTRICAL SHOCK OR 
FIRE. REMEMBER NEVER TO USE A CORD WITH ANY KIND OF 
DAMAGE OR WEAR. 

5)

 

UNIT MUST BE KEPT DRY AT ALL TIMES, INCLUDING MOTOR, 
WIRING AND EXTERIOR. IF UNIT BECOMES WET, THOROUGHLY 
DRY BEFORE NEXT OPERATION. 

6)

 

TO PREVENT OVERHEATING THE UNIT, KEEP AIR INTAKES CLEAR 
AT ALL TIMES, CLOGGING OR BLOCKING THE AIR INTAKES COULD 
RESULT IN A FIRE OR ELECTRICAL HAZARD.  

7)

 

IN ORDER TO PREVENT INJURY DO NOT REMOVE ANY SCREENS OR 
SAFETY GUARDS FROM THE UNIT AND TO AVOID OBJECTS FROM 
COMING IN CONTACT WITH THE BLOWER WHEEL.  UNIT DAMAGE 
IN THIS MANNER WILL VOID YOUR WARRANTY. 

8)

 

DO NOT OPERATE UNIT CLOSE TO ANY DANGEROUS AREAS, SUCH 
AS EXPLOSIVE GASES, FLAMMABLES, HEATERS AND 
UNVENTILATED ENVIRONMENTS, WHICH MAY RESULT IN 
EXPLOSIONS OR ELECTRICAL HAZZARDS. 

9)

 

DO NOT USE ANY FORM OF SPEED CONTROL DEVICE AS DOING SO 
MAY CAUSE INJURY OR FIRE. 

10)

 

ALWAYS PLACE BLOWER ON A SMOOTH AND LEVELED SURFACE 
FOR SAFE OPERATION. 

11)

 

DO NOT USE UNIT IF DAMAGED. 

12)

 

BEFORE CLEANING OR SERVICING UNPLUG UNIT. 

13)

 

ALL BLOWERS IN OPERATION MUST BE SUPERVISED AT ALL 
TIMES. 

14) DO NOT EXPOSE TO RAIN, WATER OR SNOW. 
15) OUTDOOR USE: UNIT MUST BE CONNECTED TO A  G.F.C.I (GROUND       
FAULT CIRCUIT INTERRUPTER) PROTECTED RECEPTACLE. 

 

WARNING 

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS 
BLOWER WITH ANY SOLID-STATE SPEED CONTROL DEVICE. 
THE USE OF A 3-PRONG TO 2-PRONG ADAPTER IS PROHIBITED, ONLY 
USE A 2-PRONG TO 2-PRONG ADAPTER.

 

Summary of Contents for GRIZZLY GP-1-UL







Reviews: