background image

7

LIMITED MANUFACTURER’S WARRANTY

The manufacturer warrants that goods sold to the original user shall be free from defects in material 

and workmanship as follows:

1-year parts and labor on the entire unit. 

DAY 1-30: A unit that fails within the first 15 days after the sale to an end-user may be eligible to be 

replaced with a new unit at the sole discretion of the manufacturer. All transportation costs will be 

covered for the customer.

DAY 30-YEAR 1: A unit that fails between 15 and 365 days after sale will have parts and labor charges 

covered under warranty, but transportation charges are to be paid by the customer. Transportation 

costs include travel charges by repair personnel, or shipping charges to move the unit to and from a 

repair location.

The manufacturer will not be responsible for:

1. Useful filter life / replacement filters.

2. Damage due to failure to perform normal maintenance as outlined in the Instruction Manual.

3. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or any other damages 

    due to the inadequacy or interruption of electrical services.

4. Damage or repairs needed as a consequence of any misapplication, abuse, neglect, unauthorized 

     alteration, improper servicing, or operation, including operation outside the voltage and frequency 

     limitations as stated on the unit rating plate.

5. Damage as a result of flooding (immersion), fires, lightning, freezing of residual water, corrosive 

     environment, or other conditions beyond the control of the manufacturer.

6. Reimbursement for warrantable replacement parts not supplied by the manufacturer.

7. Shipping damage, or damage as a result of abuse in transporting the unit.

The manufacturer does not warrant that the goods sold are merchantable or fit for any particular 

purpose, and makes no warranties other than as stated in this section.

All other warranties, guaranties, or representations, express or implied, by operation of law or 

otherwise, are expressly disclaimed.

If circumstance warrants, the manufacturer may opt to refund the purchase price of such goods. 

Where applicable, as indicated above, the manufacturer will pay return transportation charges on 

returned goods not exceeding the transportation charges applicable to ship from original destination 

unless the returned goods are free from defect and conform to specifications. Be sure to review this 

instruction booklet. Returned goods which are found by the manufacturer to be free from defect 

and to conform to specifications shall be held for Purchaser’s shipping instructions, which shall be 

furnished promptly upon request.

The manufacturer’s liability shall in no event extend beyond replacement, repair or refund of  the 

purchase price and shall not be liable under any circumstances for special, contingent, incidental or 

consequential damages,  nor  for  losses,  damages,  or  expenses  directly or indirectly arising from  

the  use of the goods, including without limitation, warehousing, labor, handling and service charges, 

die, equipment, or machine breakage, nor for costs, lost profits or loss of good will. The use of substi-

tute parts and/or filters in this product voids all warranties and performance claims. The remedies set 

forth herein are  exclusive.

Any replacement parts supplied under warranty will be warranted for the balance of the product’s 

warranty.

Establishing the proof of purchase date for warranty purposes is the responsibility of the end-use 

customer, failing which, the effective date will be based upon the date of manufacture plus thirty (30) 

days. Retain your bill of sale as proof of purchase.

For warranty information and assistance contact B-Air®  at 877.800.2247 or email 

warranty@b-air.com.

RA-

650

Summary of Contents for RA-650









Reviews: