![background image](http://html.mh-extra.com/html/b-and-g/h3000-pilot/h3000-pilot_owners-manual_459553094.webp)
H3000 Pilot Handbook___________________________________________________
HB-3001-02
94
LINEAR FEED BACK UNIT
Linear Feedback Unit
Where installation of the conventional rudder reference unit is difficult or
physically impossible, a linear feedback unit (SEN-RUD-LFB) can be
used. The linear feedback unit comprises of a tube approximately 23mm
(7/8 inch) in diameter and 300mm (12 inch) long. This assembly is
attached to the top of the B&G Ram types 1 or 2. Each end of the linear
feedback unit has a small ball joint that is attached to corresponding
pillars on the ram; the ball joints are retained using washers and spring
clips.
LINEAR
FEEDBACK
UNIT
Linear Feedback Unit
Summary of Contents for H3000 Pilot
Page 1: ...Pilot Handbook www bandg com ...
Page 106: ......