INSTRUCTION MANUAL
Technical changes reserved
B+B 0141 0315-21 June 2011
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
23 / 25
11. Observations
The logger is an electronic device and some basic care is required:
• When opening the device for battery replacement or connecting sensors avoid touching the circuit for not causing
damages resulting from static electricity
• When the device is opened, avoid liquid and/or dust contact
•
Use a screwdriver to open the case cover
• Pay attention to batteries polarity: The positive terminal should be placed directed towards the center of the device
• Worn batteries should not be recharged, dismantled or incinerated. After use, batteries must be disposed according
to local legal rules
•
After replacing batteries back to the logger, make sure the cover is firmly attached to the socket
12. Most frequent problems
The LED is not flashing:
•
The LED flashing light is intentionally weak, and it can be difficult to see it in illuminated environments
•
Make sure it is not flashing at all.
• Make sure the battery is installed correctly
• Make sure the battery is not discharged
Communication with the logger fails:
• Make sure the COMM port is selected correctly and there is no other program using the same port during
communication attempts
• Make sure there is no physical obstacle blocking the infrared signal
• Make sure the cable is well connected to the PC port
• Make sure the port selected does not present any problem
13. Maintenance
The housing can be cleaned with a wet cloth. Do not use chemical solvents. With the exception of exchanging empty
batteries the logger is widely maintenance free.
14. Dimensions
