TagTemp USB Temperature Logger
0568 0037-01
0141 0315-92 28.11.2022
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Seite
5
von
14
Technische Änderungen vorbehalten
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
7.2.1
General Parameters
INFORMATION
•
Device Tag
: Allows you to set a name for the digital channel. The field accepts up to 16 characters.
•
Serial Number
: Shows the device unique identification number.
•
Model
: Shows the device model name.
•
Firmware Version
: Shows the firmware version recorded in the device.
•
Memory Capacity
: Shows memory space still available for new logs.
•
Logging Status
: Informs if the device is registering or not.
•
Battery Level
: Shows the device's battery charge level.
CLOCK
•
PC Date/Time
: Shows the date and time of the computer.
•
Date/Time
: Shows the date and time of the device when it was read by NXperience.
7.2.2
Channels Parameters
TEMPERATURE
•
Tag:
Allows you to set a name, which will be used as channel identification during a download, for the channel. The field allows up to
16 characters.
•
Input Type:
Shows the type of sensor supported by the device.
•
Unit
: Allows you to define the unit °C or °F
•
Mode
: Allows you to define how the value measured will be registered. Options are:
o
Instant
: The value logged will be exactly the value measured at each interval defined. Measurement is taken at the end of
the defined interval. The minimum interval between measurements is 5 seconds.
o
Maximum
: The value logged will be the maximum value found within ten consecutive measurements taken within a
predefined interval. The minimum interval between measurements is 50 seconds
o
Minimum
: The value logged will be the minimum value found within ten consecutive measurements taken within a
predefined interval. The minimum interval between measurements is 50 seconds.
F
IGURE
4
General Parameters
F
IGURE
5
Channels Parameters
