IMediaChassis Series
15
DC POW ER W IRING, REPLACING POW ER SUPPLY
MODULES AND FANS
DC POWER SUPPLY WIRING INSTRUCTION
S
The following diagram shows the wiring configurations for -48 VDC power supply
modules for the iMediaChassis/6.
Figure 9: DC Wiring Scheme for iMediaChassis/6
USER-REPLACEABLE POW ER SUPPLY MODULES
The iMediaChassis/6 ships from B+B SmartWorx with one or two power supply
modules installed depending on the model. Chassis ordered with one power
supply come with a filler tray installed in the second slot.
To install a second power supply:
1. Remove the filler tray.
2. Slide the power supply module into the chassis and click into place.
3. Attach power cord.
To remove a power supply module:
1. Disconnect the power source from the power supply.
2. Move the Power Supply Release switch toward the right and hold while
grasping the power supply module by the silver handle.
3. Slide out of the chassis. (Power supply modules are hot-swappable.)
4. Install new power supply module.