Bischoff & Bischoff GmbH | 12.11.2015
EN
15
FORTIS
| Scooter
Scooter |
FORTIS
3.5.4. Arm rests
The arm rests can be swivelled backwards in order to make it easier to
mount and dismount. In addition, the height, distance and angle of
support of the arm rests can be adjusted.
Height
•
Loosen the handscrew (fig. 09) at the top of the arm rest
attachment while holding on to the arm rest.
•
Bring the arm rest to the required height and tighten the screw
again.
•
The arm supports can also be removed after loosening the
handscrew (fig. 09), e.g. for replacement.
Distance
•
Loosen the handscrew (fig. 10) at the bottom of the arm rest
attachment while holding on to the arm rest.
•
Adjust to the required distance and tighten the screw again.
Angle of support
•
You can adjust the angle of support of the arm rests by screwing
•
the Allen screw (fig. 11) of the relevant arm rest further in or by
•
unscrewing it.
3.5.5. Seat belt
The seat belt is attached to the frame from the side.
•
Adjust the belt length to meet your needs by positioning the clasp
accordingly.
•
Fasten the belt with the belt buckle.
•
Unfasten the belt by pressing the red button (fig. 12) on the belt
buckle.
09
10
11
12
