Rev: 03/2009
KNX-GSM Gateway
Page 14 of 19
©
b+b Automations- und Steuerungstechnik GmbH
KNX-GSM GATEWAY.DOC
In the upper part of the window you have to enter the SIM card details to access the mobile network.
Please enter the correct PIN number of the card, and the matching phone number. All phone num-
bers have to be entered in the international format (+49…) without blanks and special characters!
Up to eight receiver phone numbers can be stored and used in the gateway (E1 – E8). Each mes-
sage can refer to one or more of this numbers, so you can create different message priorities.
You can specify an external EIB/KNX time address, to synchronize the Real-Time-Clock of the
Gateway with an EIB/KNX DCF device.
In the middle area of the window you can see the list with up to 100 defined messages, which will be
send by incoming EIB data. Below the list you can optionally activate certain alarming messages..
Sending a SMS by incoming EIB data
Up to 100 different events and messages can be stored in the Gateway. Push the button „Add…“ to
define a new message, the following window will appear:
