Bischoff & Bischoff GmbH |2022-09-16 Revision: 2
27
26
27
26
VFG
| Walking Aid
Walking Aid |
VFG
EN
5. Use of the helper
5.1. Adjust stick height
•
Press the spring pins on both sides and bring thewalking aid into
the orthopaedically correct position.
•
Snap the spring pins back into place on both sides.
Be careful of your fingers when adjusting,
there is a danger of getting caught.
Ensure that the plug connections are correctly
seated.
5.2.
Application of the helper
•
Use the walker only on firm and level ground.
•
When walking, the walker should be used with the less
extendedfeet to the side of the user, otherwise there is a risk of
tripping, see illustration (Fig. 2).
•
Make sure that the four-legged support is always placed vertically
and not too and not too far away from your body.
•
All four feet of the walker must have a firm grip before you move
forward with small steps.
The walker may only be used by persons with a maximum user
weight of 100 kg.
6. Technical data
Dimensions and weights
Total height (mm):
740 - 970
Height adjustment steps
10
Unladen weight (kg):
0,8
Max. User weight (kg):
100
Material
Frame
Bronze anodised
The dimensions given are subject to manufacturing tolerances
of +/- 10mm.
2.
