Bischoff & Bischoff GmbH |2021-02-18 - Revision: 1
EN
45
44
Via
| Foldable power wheelchair
Foldable power wheelchair |
Via
3.3. Scope of delivery
Immediately on receiving the goods, check that the delivery is complete.
The delivery consist of:
•
Packing
•
Foldable power wheelchair (ready to use incl. 2 batteries)
•
Charger
•
User manual
•
Seat cushion
•
Lap belt
•
Anti-tip wheels (enclosed)
3.4. Overview
Control unit
Swing away armrest
Fold-down backrest
Seat cushion
Castors
Fold-down footplate
Bag
Battery housing
Electromotor
Drive wheel
Push bar
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
I
J
K
K
2
3.5. Basic setup
Before using it for the first time, adjust the foldable power wheelchair
to suit the user. Adjusting the wheelchair allows fatigueless driving
in a physiologically correct position. The basic setup of the foldable
power wheelchair are described in this section. Carry these out in
collaboration with the medical equipment retailer.
3.5.1. Backrest
Before setting off each time, check that the knurled
screws on the rear of the backrest (Fig. 03) are tight.
You can adjust the slack in the backrest sling by tensioning the backrest
sling as required and fixing it in the required position using the hook
and loop straps.
3.5.2. Control unit
You can mount the control unit on the left or right side. Your dealer can
help you to do this.
•
Push the tube below the control unit into the tube below the
armrest
•
Position the control unit at a distance which is comfortable for the
user
•
Fix the knurled screw below the armrest, by rotating in a clockwise
direction and tighten by hand
In order to adjust the control unit position at a later date (Fig. 4),
•
undo the knurled screw,
•
position the control unit at the required distance and
•
re-tighten the knurled screw by hand.
3
4
